日本熟妇高清免费视频

<rp id="op7ej"></rp>

<dd id="op7ej"><big id="op7ej"></big></dd>
<dd id="op7ej"></dd>
    <em id="op7ej"><acronym id="op7ej"><blockquote id="op7ej"></blockquote></acronym></em>
    <th id="op7ej"><track id="op7ej"><sup id="op7ej"></sup></track></th>
  • <dd id="op7ej"></dd>
    <li id="op7ej"></li>
  • Welcome to our online store!

    Cart:

    0 item(s) - $0.00
    You have no items in your shopping cart.

    0

    ACCESSORIES

    5 Item(s)

    Grid  List 

    1. BONDED ABRASIVES CUT OFF DISK * Images are for illustrative purposes only*

      BONDED ABRASIVES CUT OFF DISK * Images are for illustrative purposes only*

      Type 41 cutting disk is bonded by resinoid and used for severing. The net reinforcement is for the circumference structure, therefore only the circumference is in contact with the work piece during use. Do not exceed maximum speed nor use the flat annular face as this will result in breakage and possible danger from the flying debris. Can't use for grinding at the face. To use with SOUTH HOUSTON, Model : SHC7520-F CUTTING DISK Type : 41 Dimension : 76 X 1.8t X 10mm Abrasive : Aluminum Oxide Maximum Speed : 23,000RPM Grit : A46 Learn More

    2. SHAFT MOUNTED QUICK CHANGE DISK PADS  * Images are for illustrative purposes only *

      SHAFT MOUNTED QUICK CHANGE DISK PADS * Images are for illustrative purposes only *

      Description Non-woven Surface Conditioning Abrasives are open Nylon web impregnated with abrasives. The product are available in endless belt, Hook and Loop disk and quick change disk. Non-woven Surface Conditioning abrasives are colour coded BROWN(COARSE), RED(MEDIUM) and BLUE(FINE). Unlike grinding or wire brush, the most important benefit of non-woven applied to removal of surface imperfections, removal of glue, sealant, paint and coatings, removing heat induced discoloration, weld splatters and cleaning is not harming or gouging the base surface. Application Deburring, Cleaning, Blending and Finishing of Stainless Steel, Titanium, Aluminium, Fibreglass on Irregular shape, hard to reach surfaces, internal pipe etc. Shaft mounted Quick Change disk pads in R or S connection styles are available for disk diameters 1"(25mm), 1.5"(40mm), 2"(50mm) and 3"(75mm). These can be selected from the table attached for the corresponding connection style and diameters. Quick Change disk pads can be mounted on SOUTH HOUSTON Die grinder SHDG-M622-XF and Angle Die Grinder SHAG-M618-XF. Learn More

    3. ENDLESS ABRASIVES BELT * Images are for illustrative purposes only *

      ENDLESS ABRASIVES BELT * Images are for illustrative purposes only *

      Description Non-woven Surface Conditioning Abrasives are open Nylon web impregnated with abrasives. The product are available in endless belt, Hook and Loop disk and quick change disk. Non-woven Surface Conditioning abrasives are colour coded BROWN(COARSE), RED(MEDIUM) and BLUE(FINE). Unlike grinding or wire brush, the most important benefit of non-woven applied to removal of surface imperfections, removal of glue, sealant, paint and coatings, removing heat induced discoloration, weld splatters and cleaning is not harming or gouging the base surface. Application Deburring, Cleaning, Blending and Finishing of Stainless Steel, Titanium, Aluminium, Fibreglass on Irregular shape, hard to reach surfaces, internal pipe etc. Endless Belt 10mmX330mm and 20mmX520mm will fit FUJI Air Belt Sander FBS-1-1 and FBS-1-2 models respectively. Learn More

    4. 5" HOOK AND LOOP DISK * Images are for illustrative purposes only *

      5" HOOK AND LOOP DISK * Images are for illustrative purposes only *

      Description Non-woven Surface Conditioning Abrasives are open Nylon web impregnated with abrasives. The product are available in endless belt, Hook and Loop disk and quick change disk. Non-woven Surface Conditioning abrasives are colour coded BROWN(COARSE), RED(MEDIUM) and BLUE(FINE). Unlike grinding or wire brush, the most important benefit of non-woven applied to removal of surface imperfections, removal of glue, sealant, paint and coatings, removing heat induced discoloration, weld splatters and cleaning is not harming or gouging the base surface. Application Deburring, Cleaning, Blending and Finishing of Stainless Steel, Titanium, Aluminium, Fibreglass on Irregular shape, hard to reach surfaces, internal pipe etc. 5 inch Hook and Loop disk will adhere directly to the Hook and Loop pad of SOUTH HOUSTON 5 INCH ORBITAL SANDER models SHOS-5CH or SHOS-5NH. Removal is by peeling the worn disk off the pad. Learn More

    5. ABRASIVES FAN GRINDER * Images are for illustrative purposes only *

      ABRASIVES FAN GRINDER * Images are for illustrative purposes only *

      Description Fan grinders are flaps of coated ALO abrasive cloths arranged circumferentially on a shaft. The grit is from the roughness of the abrasive cloth that lined the tool. Dimensions specified by diameterXwidth of abrasive cloth can be chosen from the attached Table. Air die grinder rotates at faster RPM than electric ones. The SOUTH HOUSTON S81-I-SHDG-M622-XF rotates at 22,000RPM and S81-I-SHAG-M618-XF at 18,000RPM. Both are air driven and has 6mm Metric collet. Take note that the correct die grinder collet must grip the corresponding shank size of the Fan Grinder ie Imperial 1/4" collet should be used on Fan grinders with 1/4" shank, and not metric 6mm shank. The maximum speed of the Fan Grinders are generally high, but should not be exceeded for Safety reasons Neither should slow RPM be used, as it impedes the grinding efficiency of the Fan Grinder. Diameter: 30mm, 40mm and 50mm Shank: 6mm or 1/4" Grit: 40, 60, 80, 120, 180, 240, 320 Material: Aluminium oxide coated on Heavy cloth Max Speed: 30mm@30,000rpm, 40mm@25,000rpm, 50mm@25,000rpm Die grinder for 6mm shank: S81-I-SHDG-M622-XF or S81-I-SHAG-M618-XF Learn More

    5 Item(s)

    Grid  List 

    You need it, we’ve got it.
    © Sing Huat Hardware & Machinery Pte Ltd. All Rights Reserved.
    日本熟妇高清免费视频
    <rp id="op7ej"></rp>

    <dd id="op7ej"><big id="op7ej"></big></dd>
    <dd id="op7ej"></dd>
    <em id="op7ej"><acronym id="op7ej"><blockquote id="op7ej"></blockquote></acronym></em>
    <th id="op7ej"><track id="op7ej"><sup id="op7ej"></sup></track></th>
  • <dd id="op7ej"></dd>
    <li id="op7ej"></li>
  • [profiler]
    Memory usage: real: 36175872, emalloc: 35274456
    Code ProfilerTimeCntEmallocRealMem